Rops (Roll Over Protection System) Replacement - Toro Z MASTER 2000 Series Service Manual

Fuel Tank Installation (continued)

ROPS (Roll Over Protection System) Replacement

ROPS (Roll Over Protection System) Removal
2000 Series Z MASTER® Service Manual
3438-778 Rev A
7. Open the fuel supply valve.
g336052
8. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop, and remove the key. Engage the
parking brake.
2. Fold the ROPS assembly into the upright position and lock in place.
Note: For easier access, remove the right and left side consoles.
Console Replacement (page 5–13) Left Console Replacement (page 5–11)
3. Support the ROPS assembly and remove the 4 mounting bolts.
g336053
Figure 36
Figure 37
Page 5–19
Right
Chassis: Service and Repairs