Electric PTO Clutch Removal (continued)
Electric PTO Clutch Installation
Electrical System: Service and Repairs
g344400
7. Disconnect the clutch wire connector from the PTO clutch.
g336161
8. Remove the screw and 2 spring washers securing the PTO clutch to the
machine.
9. Remove the PTO clutch from the machine.
1. Install the PTO clutch onto the underside of the machine, secure with the 2
spring washers and (7/16 x 3 inch) screw. Torque the screw to 66.4–82.7
N • m (49–61 ft-lbs).
2. Connect the clutch wire connector to the PTO clutch.
Figure 120
Figure 121
Page 8–12
TITAN® Max Service Manual
3442-428 Rev A