Seat Installation (continued)
TITAN® Max Service Manual
3442-428 Rev A
g344220
3. Install the 2 wire retainers to the bottom of the seat and seat plate.
g344219
4. Install the 2 (5/16-18 inch) nuts and 2 (0.312-18 x 1.000 inch) carriage screws
securing the seat plate to the chassis. Torque the screws to 22.597 ± 2.82 N
• m (200 ± 25 in-lb).
Figure 43
Figure 44
Page 5–21
Chassis: Service and Repairs