Toro TITAN Max Service Manual page 86

Mower Spindle Installation (continued)
Mower Deck: Service and Repairs
g344427
2. Install the spacers into the bottom of the spindles.
3. Using a (32 mm) socket and a hammer, install the bottom bearings into the
spindles.
4. Install the spindle assemblies into the mower deck.
5. Install the 6 (5.16-18 x 7/8 inch) new taptite screws securing spindle
assemblies to the mower deck. Torque the screws to 13.6–18.98 N • m
(10–14 ft-lb).
g344426
6. Install the bearing shields.
7. Install each drive blade sheave and spindle shaft into the mower deck.
8. Install the (0.750-16 inch) spindle lock nut and washer securing the each
spindle shaft to the drive blade sheaves. Torque the nut to 135.58–149 N • m
(100–110 ft-lb).
Figure 88
Figure 89
Page 6–16 TITAN® Max Service Manual
3442-428 Rev A