Toro TITAN Max Service Manual page 78

Mower Deck Removal (continued)
Mower Deck Installation
Mower Deck: Service and Repairs
g344402
10. Raise and support the unit so that the front wheels are off the ground, block
rear wheels.
11. Remove the mower deck.
1. Raise and support the unit so that the front wheels are off the ground, block
the rear wheels.
2. Place the mower deck under the machine.
3. Lower the unit to the floor.
4. Install the 2 (3/8 inch) LH upper shoulder screws and 2 (3/8-16 inch) washers
securing the deck support chains to the deck lift shaft. Repeat on the RH
side of the machine.
g344402
Figure 72
Figure 73
Page 6–8 TITAN® Max Service Manual
3442-428 Rev A