Toro TITAN Max Service Manual page 33

Engine Installation (continued)
TITAN® Max Service Manual
3442-428 Rev A
9. Install the hydrostatic drive belt onto the machine.
Installation (page 7–8)
10. Install the deck drive belt onto the mower deck.
(page 6–12)
11. Connect the clutch wire to the clutch.
12. Connect the choke cable.
13. Connect the throttle cable.
14. Connect the black engine ground wire.
g344817
15. Connect the red (B+) wire from the starter.
g335895
16. Connect the chassis wire harness to the main engine wire harness.
Choke Control Assembly Removal (page 5–29)
Throttle Cable Assembly Installation (page 5–27)
Figure 9
Figure 10
Page 4–7
Hydrostatic Drive Belt
Deck Drive Belt Installation
Engine: Service and Repairs