Table of Contents
Advertisement
Chapter 2: Installation
Installing the Switch on a Desktop
50
You may install the switches on a desktop, in a standard 19-inch
equipment rack, or on a wall. To install the switch in a rack, see "Installing
the Switch in an Equipment Rack" on page 51. To install the switch on a
wall, see "Installing the Switch on a Wall" on page 53.
To install the switch on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Turn the switch over and place it on a table.
3. Attach the four rubber feet to the bottom of the switch as shown in
Figure 25.
Figure 25. Attaching the Rubber Feet
4. Turn the switch over again and place it on a flat, secure surface (such
as a desk or table) leaving ample space around the unit for ventilation.
5. Go to "Installing Optional SFP Transceivers" on page 56 or "Cabling
the Switch" on page 59.
Advertisement
Table of Contents
