Table of Contents
Advertisement
8. Realtime
Control
Enable
196
ESI-32 Operation Manual
This function allows you to exempt specific realtime control destinations
within a zone from being affected by the realtime controls. Off prevents
the realtime control destination from being affected by the realtime
controls. On (the default) allows the destinations to be affected by the
realtime controls.
Example: Suppose you wanted the pitch wheel to only bend the upper
half of the keyboard and not the lower half. Simply select the lower half
of the keyboard as the current zone and turn Pitch Off in this screen.
That's it!
1. Activate Dynamic Processing module.
2. Select Submodule 8.
3. Move the cursor to the parameter(s) to be adjusted, and select
On or Off with the data entry knob. The first page reads:
CONTROLLERS ENABLE
Pitch:
VCF Cutoff:
Level:
4. Select page two by pressing the right cursor button. The second
page controls the following realtime control destinations:
CONTROLLERS ENABLE
LFO->Pitch:
LFO->VCF Cutoff:
LFO->VCA:
5. Select page three by pressing the right cursor button. The third
page controls the following realtime control destinations:
CONTROLLERS ENABLE
Attack:
Pan:
6. Press ENTER to exit the submodule. The ESI-32 will return to the
Module Identifier.
on
on
on
on
on
on
on
on
Advertisement
Table of Contents
