Erase Sample - E-Mu ESI-32 Operation Manual

3. Erase
Sample
001 Untitled Sample
[0-9]/Encoder/Kybd
5. Press ENTER to exit the submodule. The ESI-32 will return to the
Module Identifier.
Individual samples can be erased from the bank, and newly created
samples in memory can be erased using this function.
1. Activate Sample Management module.
2. Select Submodule 3.
3. Select the sample to be erased, then press ENTER.
001 Current Sample
4. If the sample is stereo, select whether you want to erase the left
side, right side, or the entire stereo sample.
001 Selected Sample
Side:
Select L/R/Stereo
5. Decide if you really want to erase the sample. The ESI-32 will
inquire if you are sure.
6. Press Yes to erase the sample, or No to cancel the operation. In
either case the ESI-32 will return to the Module Identifier.
RENAME SAMPLE

ERASE SAMPLE

Select a Sample
ERASE SAMPLE
Stereo
97
Sample Management