E-Mu ESI-32 Operation Manual page 88

A few of the standardized MIDI switch
numbers are listed below.
64 - Sustain Switch
65 - Portamento Switch
66 - Sostenuto
67 - Soft Pedal
68 - Hold Pedal 2
80
ESI-32 Operation Manual
MIDI controller numbers
are assigned here...
Master/Global
(MIDI Globals)
Pitch Control (pwh)
Mod Control (01)
MIDI
Pressure (chp)
IN
Pedal Control (04)
MIDI A (6)
MIDI B (2)
In order to use the MIDI controllers, you must assign both a source (MIDI screen) and a destination
(Realtime Controls screen).
6. Select page three by pressing the right cursor button. Page four
shows:
Switch 1 Control:off
Switch 2 Control: 65
The footswitch assignments are like the other control assignments except
that they control switch functions (also assigned in the Preset Definition,
Realtime Control submodule) such as Sustain, Sample Cross-switch, etc..
This screen allows you to match the ESI-32 to your MIDI controller's
footswitch numbers.
• Footswitch 1: Assign footswitch 1 to a MIDI switch controller
number. Available assignments include Off and switch controllers 64
through 79.
• Footswitch 2: Assign footswitch 2 to a MIDI switch controller
number. The process is exactly the same as assigning a switch
controller to footswitch 1.
8. Press ENTER to exit the submodule. The changes will be stored
and the ESI-32 will return to the Module Identifier.
What the controllers actually
do is assigned here.
Preset Definition
1
(Realtime Controls)
2
3
4
5
6
MIDI GLOBALS
1 Pitch
2 VCF Cutoff
3 VCA Level
4 LFO Pitch
5 LFO Cutoff
6 LFO VCA
7 Pan
8 Attack
9 Crossfade