Erase Bank; Dynamic Allocation - E-Mu ESI-32 Operation Manual

3. Erase
Bank
Tip: After erasing the bank, the ESI-32
will automatically create an empty bank for
you.
4. Dynamic
Allocation
58
ESI-32 Operation Manual
Erasing a bank erases ALL the memory in the ESI-32, which includes all
samples and presets.
1. Activate Master/Global module.
2. Select Submodule 3.
3. Decide if you really want to erase the bank. The display will
inform you that you are about to erase all samples and presets in the
current bank.
Erases All Presets,
Are You Sure? Y/N
4. Press Yes to erase the bank or No to cancel the operation. In
either case, the ESI-32 will return to the Module Identifier.
This function (when on) bypasses the channel assignments made in the
Output Channels submodule of the Dynamic Processing module, and
allows all of the ESI-32's 32 channels to be assigned in a circular manner
as needed. (Channels are assigned in ascending, circular order as notes
are played, i.e. 30, 31, 32, 1, 2, 3...)
1. Activate Master/Global module.
2. Select Submodule 4.
3. Select whether dynamic allocation is On or Off.

DYNAMIC ALLOCATION

Mode:
4. Press ENTER to exit the submodule. The ESI-32 will return to the
Module Identifier.

ERASE BANK

and Samples!
off
Select on/off