Table of Contents
Advertisement
6. Paste
Region
Mode: Insert
Sample 00
Tip: The left and right cursor keys will
change the Paste Offset point so that it falls
on positive zero-crossing point in the
waveform.
128
ESI-32 Operation Manual
Portions of a sample can be cut, copied, and pasted to other samples, or
the samples from which they came. Paste takes the clipboard contents
and either inserts them in a sample at a specified point, or mixes them
with a sample starting at a specified point. For more information see the
section Background: Cut, Copy, Paste, and Undo.
Destination Sample
Paste Offset
The sample on the clipboard is pasted
into the break in the destination sample...
Crossfade
or crossfaded in and out of the break in the destination sample.
1. Activate Digital Processing module.
2. Select Submodule 6.
3. Select the sample that you want to paste the clipboard contents
into, then press ENTER.
PASTE REGION into
S00 Selected Sample
Select Dest Sample
4. Specify the paste point on line two as an offset (in samples)
relative to the beginning of the sample, then press ENTER.
Size
Advertisement
Table of Contents
