Load Zone - E-Mu ESI-32 Operation Manual

1. Load
Zone
164
ESI-32 Operation Manual
This submodule allows a zone, with its samples, to be loaded from the
internal hard disk drive or external storage devices into any preset.
1. Activate Preset Definition module.
2. Select Submodule 1.
3. If you wish to select a different drive, move the cursor to the
drive number. If not, proceed to step 5.
4. Select the drive containing the zone to be loaded, then press
ENTER.
LOAD ZONE from
D1 Main HD
Select a Drive
5. Select the bank that contains the preset from which the zone
will be loaded, then press ENTER.
LOAD ZONE from
01 Main HD
B00 Current Bank
6. Select the preset that contains the zone to be loaded, then press
ENTER.
LOAD ZONE from
P00 Current Preset
Select Source Preset
Sample 1 Sample 2
The zone contains samples as well as dynamic processing parameters.
Select a Bank
Sample 3
ZONE
Sample 4