Save As Eiii Bank - E-Mu ESI-32 Operation Manual

5. Save as EIII
Bank
This function allows you to save an ESI-32 bank in the original EIII
bank format so that it can be read by an EIII (the EIII is the predecessor
of the ESI-32). If the bank you are trying to save exceeds 8 Mb, or has
more then 100 presets or 100 samples, you will not be allowed to save
as an EIII bank.
1. Activate Master/Global module.
2. Select Submodule 5.
3. If necessary, select the drive to which the bank will be saved.
The ESI-32 will default to the current drive. If you want to choose a
different drive, place the cursor under the drive number in line two
of the display, select the appropriate drive and press ENTER.
SAVE E3 BANK into
D3 Syquest SQ555
Select a Drive
4. Select the bank number to which the bank will be saved. Empty
banks will be indicated as such, along with their bank number on
line three. Or, you can overwrite an existing bank.
SAVE E3 BANK into
D3 Syquest SQ555
B02 Rik 12 String
Select a Bank
5. After selecting the bank number and drive, press ENTER. The
display will say "Saving Bank". After a few seconds, the bank will be
saved. The display will revert to the preset selection screen.
59
Master/Global