Table of Contents
Advertisement
6. Preset
Size
Tip: The percentages of sample memory
may add up to considerably more than 100%
if the samples are used in several presets.
7. Merge All
Presets
How much bank memory does a preset require? Use this function to
find out.
1. Activate Preset Management module.
2. Select Submodule 6.
3. Scroll through the preset numbers and select the preset whose
size you want to check. The second line shows the selected preset,
the third line the amount of preset memory used (both as a percent-
age of the total bank memory and as an absolute number of bytes),
and the fourth line the amount of sample memory used (both as a
percentage of the total bank memory and as an absolute number of
bytes).
P00 Current Preset
Preset:
Sample: 9.2% 1543716
4. Press ENTER to exit the submodule. The ESI-32 will return to the
Module Identifier.
This function allows you to load all the presets from any bank on any
hard disk into the currently loaded bank. This is a very handy feature
when you want to create massive, multi preset banks.
1. Activate Preset Management module.
2. Select submodule 9.
3. If necessary, select the drive from which you wish to load the
bank. The ESI-32 will default to the current drive. If you want to
choose a different drive, place the cursor under the drive number in
line two of the display, select the appropriate drive and press
ENTER.
MERGE PRESETS from
D1 Main HD
4. Select the bank number you wish to load into the current bank,
then press ENTER.
PRESET SIZE
.7%
922
Select a Drive
111
Preset Management
Advertisement
Table of Contents
