Sample Management; Select Sample; Load Sample - E-Mu ESI-32 Operation Manual

0. Select
Sample
1. Load
Sample
Tip: Pressing the Audition button from
this submodule auditions the selected
sample directly from the hard disk without
having to first load it.
This submodule selects a sample for placing on the keyboard, or the
sample into which a sound will be recorded.
1. Activate Sample Management module.
2. Select Submodule 0.
3. Select the desired sample and press ENTER. As you scroll
through non-empty samples, the display will show the sample
number, name, sampling rate, sampling length, how many presets
use the sample, and whether the sample is stereo, left, or right. And,
as you scroll through the samples, they will be playable on the
keyboard.
001 Selected Sample
Stereo
10 Presets
Samples can be loaded individually from the floppy disk, the internal
Syquest hard disk or external storage devices.
1. Activate Sample Management module.
2. Select Submodule 1.
3. If you wish to select a different drive, press the up cursor
button. If not, proceed to step five.
4. Select the drive containing the sample to be loaded, then press
ENTER.
LOAD SAMPLE from
D1 100MB HD
5. Select the bank that contains the sample to be loaded, then
press ENTER.
LOAD SAMPLE from
D1 100MB HD
B00 Current Bank

SELECT SAMPLE

44100Hz
5.3secs
Select a Drive
Select a Drive
95

Sample Management