Sample Integrity - E-Mu ESI-32 Operation Manual

The positive and negative peaks are expressed in 16-bit samples. The
offset is the DC bias present in the sample. Full scale is the maximum
level of a 16-bit number.
+32767 = Full Scale (positive)
-32768 = Full Scale (negative)
+
0
DC Offset Present
-
3. Press ENTER to filter DC offset or Escape to exit the
submodule. The ESI-32 will return to the Module Identifier.

7. Sample Integrity

Samples may occasionally have slight looping problems due to data
corruption of the sample header file. This function remedies the problem
by reconstructing the sample header. If a sample has been corrupted, the
display may show an error message such as "Mono Start Zero!".
1. Activate Digital Processing module.
2. Select 7. Digital Tools I, 7. Sample Integrity (7/7). The display
shows:
Fix all samples? Y/N
3. Press ENTER to fix samples in the bank. The ESI-32 will only
modify loops which are in need of repair.
+
0
DC Offset Removed
-
FIX SAMPLES
137
Digital Processing