Midi Mix - E-Mu ESI-32 Operation Manual

1. MIDI Mix

The MIDI Mix screen is extremely useful in that it allows you to easily
fine tune the volume and pan of each preset. In addition, it allows you to
override the output channel setting programmed in the Dynamic Pro-
cessing module and route each MIDI channel to the output of your
choice. These volume and pan settings can also be accessed from the
multimode screen, but the MIDI Mix may be more convenient for
mixdown, since the volume and pan settings for all channels are visible.
Any volume and pan changes made over MIDI will be reflected in the
screen. (Volume = MIDI continuous controller channel #7, Pan = MIDI
continuous controller channel #10)
1. Activate Master/Global module.
2. Select 9. MIDI, 1. MIDI Mix (9/1).
3. Select a MIDI channel. Use the left-right cursor buttons to scroll
through the MIDI channels. Each time you press the cursor
button, the cursor moves to the next channel's bar graph volume
display in line two. The top line of the display shows the MIDI
channel and a decimal readout of the volume setting for that chan-
nel. Use the data entry control or inc/dec buttons to change the
volume levels.
MIX C=01 Volume=127
zzzz zzzz zzzz zzzz
4. Move the cursor down to line three. The volume display on line
one now changes to display the pan setting for the currently selected
MIDI channel. Pan adds to the pan setting made in the dynamic
processing zone it is NOT an absolute pan setting. Use the left-right
cursor buttons to scroll through the MIDI channels.
MIX C=01
zzzz zzzz zzzz zzzz
5. Move the cursor to line four of the display. The pan display on
line one now changes to display the output channel assignment for
the currently selected MIDI channel. Use the data entry control or
inc/dec buttons to select the main outputs, submix outputs, or zone
(z), in which the output assignments programmed in the Dynamic
Processing module for each zone are used. Selecting main, or sub
will override the output channel selections made in the Dynamic
Processing module. Use the left-right cursor buttons to scroll
through the MIDI channels.
Pan=+00
Master/Global
77