Midi Enable; Midi Program Change -> Preset - E-Mu Xtreme Lead-1 Manual

MIDI Enable

MIDI Program
Change -> Preset
The Program->Preset
Change only works for program
changes received in Bank 0.
82 E-MU Systems
MIDI Enable lets you turn each MIDI channel on and off independently
when in Multi mode. This feature is helpful when you have other devices
connected to the same MIDI line and do not want the Xtreme Lead unit to
respond to the MIDI channels reserved for the other devices.
MIDI ENABLE
channel 01: On
Because the MIDI Enable function only makes sense if you are in Multi
mode, Xtreme Lead disables this feature when in Omni or Poly mode.
MIDI ENABLE
In Multi
Mode
channel 16: On
In Omni MIDI ENABLE
Mode
(using Omni mode)
You can also remap incoming MIDI program changes to a different
numbered preset. This is a handy feature when your master keyboard
cannot send a bank change or you want to reorder preset numbers. Any
preset can be mapped to any incoming MIDI program change number.
For example, you could set up the Program -> Preset map to call up preset
#12 whenever Xtreme Lead receives MIDI program change #26.
The four fields shown below are editable.
MIDI PROG CHNG
Incoming Program
Change in Bank 0
-> PRESET
000 User
ROM Bank
Program No.
Master Menu
MIDI Parameters
0
000
Bank No.