Disk Status - E-Mu ESI-32 Operation Manual

64
ESI-32 Operation Manual
4. Select the drive to be locked or unlocked, then press ENTER.
5. Select whether lock is on or off, then press ENTER.
6. Select the bank to be locked or unlocked, then press ENTER.
The display will show the current bank and its lock status, whether
on or off.
LOCK BANK:
D1 Selected Drive
B00 Current Bank
7. Select whether lock is on or off, then press ENTER. The ESI-32
will return to the Module Identifier.

5. Disk Status

This function displays the amount of space that is available on a hard
disk drive and if the drive is locked or not. For floppy disks, this func-
tion indicates if it is a software disk, the name and number of a bank
disk, or if the disk is blank.
1. Activate Master/Global module.
2. Select 7. Disk Utilities, 5. Disk Status (7/5).
3. Select a drive, then press ENTER. If selecting the floppy drive,
insert a disk before pressing ENTER.
D0 Floppy Drive
Select a Drive
4. One of the following displays will appear:
D1 Main Drive
Avail: 20.7%
88 Banks
D0 Floppy Drive
Floppy Disk is Blank
off
Select a Bank
DISK STATUS
DISK STATUS
8.49Mb
Unlocked
DISK STATUS