Warranty - E-Mu ESI-32 Operation Manual

Warranty

218
ESI-32 Operation Manual
Please read this warranty, as it gives you specific legal rights.
Length of Warranty
Your ESI-32 warranty covers all defects in materials and workmanship
for a period of one year (90 days for disk drives) from the date of
purchase by the original owner, provided that the Warranty Registration
Card is filled out and returned to E-mu Systems within 14 days from the
date of purchase. Cases may arise where E-mu's Service Department or
one of E-mu's authorized service centers will ask for a copy of your sales
receipt to facilitate warranty service. Please keep your purchase receipt
in a safe place.
E-mu Systems does not cover:
• Damages due to improper or inadequate maintenance, accident, abuse,
misuse, alteration, unauthorized repairs, tampering, or failure to follow
normal operating procedures as outlined in the owner's manual.
• Deterioration or damage of the cabinet. • Damages occurring during
any shipment of the ESI-32 for any reason. • An ESI-32 that has in any
way been modified by anyone other than E-mu Systems, Inc.
Limitation of Implied Warranties
No warranty is expressed or implied. E-mu Systems specifically dis-
claims the implied warranties of merchantibility and fitness for a particu-
lar purpose.
Exclusion of Certain Damages
E-mu Systems' liability for an ESI-32 found defective is limited to repair
or replacement of the unit at E-mu's option. In no event shall E-mu
Systems be liable for damages based on inconvenience, whether inciden-
tal or consequential, loss of use of the unit, loss of time, interrupted
operation or commercial loss, or any other consequential damages.
Some states do not allow limitation of the duration of implied warranties
or the exclusion or limitation of incidental or consequential damages, so
the above limitations and exclusions may not apply to you.
How To Obtain Warranty Service
All E-mu products are manufactured with the highest standards of
quality. If you find that your instrument does require service, it may be
done by any authorized E-mu service center. If you are unable to locate a
service center in your area, please contact E-mu Systems Service Depart-
ment at (408) 438-1921. They will either refer you to an authorized
service center or ask that you return your ESI-32 to the factory. When
returning an ESI-32 to the factory, you will be issued a Return Merchan-
dise Authorization number (RMA). Please label all cartons , shipping
documents and correspondence with this number. E-mu suggests you
carefully and securely pack your ESI-32 for return to the factory. (Do not
send the power cord or operation manual.) Mark the outside of the shipping
carton clearly with your RMA number. Send to E-mu Systems, Inc. 1600
Green Hills Road, Scotts Valley, California, 95066. You must pre-pay
shipping charges to E-mu Systems. E-mu will pay return shipping fees.
You will be responsible for any damage or loss sustained during ship-
ment in any direction
8/92