Erase Disk Bank; Lock Bank & Drive - E-Mu ESI-32 Operation Manual

!
Caution: The display will advise you if
you try to erase a bank or drive that is
locked. Unlock the bank or drive before
proceeding.
!
Caution: When using multiple ESI-32's
on the SCSI bus, the bank will only be
locked when accessed from the ESI-32 that
locked it. Any other ESI-32 on the bus can
still erase the bank.
This function will not let you lock a floppy
disk. To lock a floppy, open the write-protect
window on the disk.

3. Erase Disk Bank

With this utility, banks can be erased from any of the available drives.
1. Activate Master/Global module.
2. Select 7. Disk Utilities, 3. Erase Bank (7/3).
3. If you wish to select a different drive, press the up cursor. If not,
proceed to step 5.
4. Select the drive containing the bank to be erased, then press
ENTER.
ERASE DISK BANK
D1
B01 12 String
5. Select the bank to be erased, then press ENTER.
ERASE DISK BANK
D1
B01 12 String
6. Decide if in fact you want to erase the selected bank. The display
will ask if you're sure.
7. Press Yes to erase the bank or No to cancel the operation. In
either case, the ESI-32 will return to the Module Identifier.
4. Lock Bank and Drive
If you don't want to risk curious hands unintentionally erasing a bank or
drive, here' s a safeguard. A complete drive or any bank within that drive
can be locked against inadvertent erasure or tampering, and subse-
quently unlocked as needed.
1. Activate Master/Global module.
2. Select 7. Disk Utilities, 4. Lock Bank/Drive (7/4).
3. If you want to lock a drive or change the current drive, press the
up cursor button. If not, go on to step 6. The display will show the
current drive and its lock status, whether on or off.
LOCK DRIVE:
D1 Current Drive
Select a Drive
QUANTUM LP1055
Select a Drive
QUANTUM LP1055
Select a Bank
off
63
Master/Global