E-Mu ESI-32 Operation Manual page 137

Tip: Use the Copy Sample function
(Sample Management, 5) to paste the
clipboard contents to an empty sample
location.
PASTE
Offset
Select Location
5. Choose whether to insert or mix the clipboard contents at the
point selected in step three, then press ENTER.
PASTE
Offset
Mode:
Select Insert/Mix
Insert opens up a space in the sample into which the clipboard contents
fit. Equal Power Mix and Linear Mix combine the clipboard contents
with existing samples, starting at the point selected in step three. Nor-
mally, you will always use Equal Power. Use Linear Mix when the signals
are very similar or when Equal Power causes a gain in amplitude.
6.If you chose insert in step five, proceed to the next step. If you
chose mix in step five, select the level of the contents to be
mixed, then press ENTER. 100% indicates a replacement.
PASTE
Offset
Mode:Equal Power Mix
Source Amount:
Paste Offset
Destination Sample
Paste Offset
PASTE
0.00 Sec. Crossfade
Mode: MIX
Source Amount: 100%
secs samples
0.00 000001
secs samples
1.06 33943
Insert
secs samples
1.06 33943
100%
This section of
the sample will
be replaced
Digital Processing
129