Table of Contents
Advertisement
Tip: The "X" offset varies the L-R
position. The "Y" offset varies the front-back
position.
152
ESI-32 Operation Manual
Reverse Path
This function reverses the direction of a user path. When Reverse Path is
selected, the following screen will appear:
Reversing path:
Are You Sure? Y/N
Flip Path
This function causes a user path to be mirrored around the "X" axis so
that points that were to the left side of the listener are now on the right
and vice-versa. Selecting Flip Path causes the following screen to appear:
Flipping path:
Are You Sure? Y/N
Offset Path
This function allows you to add an offset to the left and right path
points, moving the entire path closer or farther, or more to the left or
right. The X offset adds to all X values; the Y offset adds to all Y values in
the path. The resulting sums are clipped to the coordinate system
(shown under Path Edit). When Offset Path is selected, the following
screen will appear:
X offset:
Y offset:
Enter X offset
Press ENTER to add the offsets to the path.
REVERSE PATH
user path 2
FLIP PATH
user path 2
OFFSET PATH
+265
+
0
Advertisement
Table of Contents
