Cut Region - E-Mu ESI-32 Operation Manual

5. Cut
Region
Tip: The left and right cursor keys will
change the start and end points so that they
fall on positive zero-crossing points in the
waveform.
Portions of a sample can be cut, copied, and pasted to other samples, or
the samples from which they came. The Cut function removes a section
of a sample, and stores the cut portion in a special part of memory called
the clipboard. For more information see the section Background: Cut,
Copy, Paste, and Undo.
Cut Start Cut End
Result of Cut
1. Activate Digital Processing module.
2. Select Submodule 5.
3. Select the sample that you want to cut a section from, then press
ENTER.
CUT REGION from
001 Selected Sample
Select a Sample
4. Specify the start point on line two, and the end point on line
three for the portion of the sample to be cut, then press ENTER.
Use the up and down cursor to choose the appropriate line. The size
of the portion to be cut on line four will change to reflect changes in
the start and end points. Cutting affects the original sample by
deleting the part being cut. The clipboard will retain this data until
replaced by something else to be copied or cut.
CUT
Start:
End:
Size:
5. If you are not satisfied with the resulting cut, proceed to Digital
Processing, 9. Undo.
Sample 00
Cut Region is Placed on Clipboard
secs samples
0.00 00001
1.61 57881
1.61 57881
Digital Processing
127