Table of Contents
Advertisement
Clear Path
This function clears all x,y and time values to zero. If this "zero" path
were used to process a sample, the sound would not move. When Clear
Path is selected, the following screen will appear:
Clearing path:
Are You Sure? Y/N
Press YES to clear the path.
Path Edit
The Edit Path function allows you to specify up to 26 points and times
for each of the ten available paths. When Path Edit is selected, the
following screen will appear:
0
1
2
Each line of this screen is a point in the path, specified by [X,Y] position
(numbers inside the [brackets]) and a time, in seconds. The point
number is the left-most number of each line and may not be edited. By
using the inc/dec buttons or the data entry control while the cursor is
under a point number, the path edit screen can be scrolled to display
and edit all 26 points.
1
R
6
Up to 26 points defining the sound location can be specified. Each point has an associated time
parameter to move the sound from the previous point.
CLEAR PATH
user path 2
PATH EDIT
0.00s [-999,500]
0.52s [+
0,
0]
0.86s [+224,999]
0, 0
0
3
4
5
2
Forward
L
153
Digital Processing
Advertisement
Table of Contents
