E-Mu ESI-32 Operation Manual page 181

!
Caution: When a zone is copied, it
overwrites that area of the destination preset.
8. If you selected only primary or secondary samples, select
whether you want to load them into the preset as primary or
secondary samples. This step allows you to copy primary sample(s)
into secondary locations and visa versa. If in step four you selected
both samples, the ESI-32 will skip this step, as these samples will
always be copied into both primary and secondary sample slots of
the destination preset.
COPY ZONE from
P01 pri
Select pri/sec
9. Select the low key where the low key of the zone will be placed,
then press ENTER. As you select notes, the display will show the
samples mapped into the preset. After loading, the ESI-32 will
return to the Module Identifier.
LOAD ZONE into
P01 both C1
Select New Low Key
173
Preset Definition