E-Mu ESI-32 Operation Manual page 196

188
ESI-32 Operation Manual
Keyboard Tracking varies the filter cutoff frequency as you play up and down the keyboard.
With 0.00 tracking, a sample' s timbre remains constant over the
selected zone. This generally gives the most realistic synthesizer and
instrument sounds. With positive tracking, the sample' s timbre
becomes brighter as you play higher up in the zone.
• Envelope Amt: varies the effect of the filter envelope on the filter
cutoff frequency from -100, which is the maximum inverted
envelope, through +00, which has no effect from the envelope, to
+100, which is the maximum positive envelope. It is usually
necessary to raise the filter cutoff value when using inverted
envelopes.
+100 (
Higher
Filter
Cutoff
Initial Cutoff Freq.
Lower
Filter
Cutoff
-100 (
Max. Negative Envelope)
The filter cutoff frequency can be modulated with a positive or negative envelope amount.
5. Select page three by pressing the right cursor button. The third
page displays the following parameters for the VCF AHDSR enve-
lope generator:
VCF Attack:
Hold:
Decay:
Sus:100%
Initial
- +
Cutoff
Freq.
ZONE
Max. Positive Envelope)
0.00s
0.00s
0.00s
Rel: 1.04s