Using Tone Dialling On A Pulse Line - Canon MultiPASSTM C50 User Manual

Using Tone Dialling on a Pulse Line

Even if you have a pulse line, the MultiPASS C50 enables you to use tone dialling
once you have connected to the number you are calling. This lets you take
advantage of many services that require tones, such as selecting options from
telephone "touch-line" services.
1. Pick up the handset and dial the number using the numeric buttons.
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
0
2. Press FUNCTION, then press TONE/+ to switch to tone dialling.
FUNCTION
4
TONE/+
3. When you have finished, hang up the handset.
When registering one-touch speed dialling and coded speed dialling numbers, if
you enter the TONE/+ button after the number, you will switch to tone dialling
after the phone connection is made.
Example:
Operation
Display
After the number (123456) is dialled, it will pause for 12 seconds (ppp) to allow
the other party to answer and then it will switch to tone (T). Now you can follow
the instructions that were recorded by the party you called.
4-24 Sending Faxes
The unit connects using the pulses required by your phone line.
When the TONE/+ button is pressed, T is displayed in the LCD.
Numbers entered after pressing the TONE/+ button will be dialled using
tone dialling.
1 2 3 4
5 6
TEL=123456pppT
/PAUSE /PAUSE /PAUSE
4
TONE/+
3
*
3
Chapter 4