Using Group Dialling
To send a fax to a group, follow these instructions.
Be sure to adjust the document feed lever before loading your document. See
page 6-5 for details.
1. Prepare the document and load it, face down, into the Automatic Document
2. Use the one-touch speed dialling buttons and/or the CODED DIAL button
~
1
6
R
and/or
CODED DIAL
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
0
3. When you finish entering groups, press START/COPY.
Chapter 3
Feeder (ADF).
If necessary, you can adjust the resolution and contrast. See page 4-3 for
details.
(along with the two-digit codes) to select the groups registered under those
buttons and/or codes.
If you make a mistake when selecting a group, press the
and start again.
You can make up to 55 groups.
If you press a one-touch speed dialling button or coded speed dialling code
that has no group (or fax number) registered under it, the LCD displays NO
TEL #. Make sure you pressed the correct one-touch speed dialling button or
entered the correct coded speed dialling code, and that the group you want
has been registered correctly under that button or code.
After entering a one-touch speed-dialling button or coded speed dialling code,
you have five or ten seconds to press each subsequent speed-dialling button or
code before the MultiPASS C50 begins sending.
The MultiPASS C50 then scans the document into memory, and begins
dialling the numbers in the groups.
(STOP) button
Speed Dialling
3-21