Table of Contents
Advertisement
This button can be used when the handset is connected to a PABX or a System
'X' exchange. The R button is used to obtain a second line to the PABX while
holding the original line (for example, when transferring a call from one
extension to another or when using some of the new features of the System 'X'
exchange*). See your PABX user guide, or contact your service provider for
details. See also page 4-20 of this user's guide.
This telephone has two methods of recall:
Use the ETH/TLB switch to select the recall method you wish to use.
The ringer switch allows you to select the ring volume of the handset for
incoming calls. Set to HI, LO, or OFF according to your preference.
The handset is designed to operate on both Multi-Frequency (Tone) and Loop
Disconnect (Pulse) telephone lines.
The tone/pulse switch enables you to switch from tone dialling to pulse dialling or
vice versa. Contact your service provider for further information.
Use a pointed instrument to set this switch to P (pulse dialling) or T (tone
dialling).
Use the numeric buttons to dial the number of the party you wish to call.
*
Press this button to enter a pause between numbers. (For pulse dialling only.)
# Button
Press this button to redial the last number you called. (For pulse dialling only.)
*System 'X' exchange features include THREE WAY CALLING, and CALL WAITING.
Appendix B
R Button
EARTH (ETH): EARTH LOOP RECALL
BREAK (TLB): TIMED BREAK RECALL
Ringer Switch
TONE/PULSE Switch
Numeric Buttons
Button
Options
B-7
Advertisement
Table of Contents
