Table of Contents
Advertisement
Jams in the Sheet Feeder
Use this procedure if the recording paper jams or misfeeds in the sheet feeder. If
this happens, the message CLEAR PAPER JAM appears in the display.
1. Gently pull any jammed paper out of the unit as shown.
2. Remove the paper stack from the sheet feeder and reload it, following the
3. Press STOP to clear the error message.
If the paper jam occurred while a fax was being received into the MultiPASS
C50's memory, that fax will print automatically when the jam is cleared.
8-8
Troubleshooting
instructions in "Loading Print Media for Automatic Feed" on page 2-45.
Make sure you push the paper to the back and right of the sheet feeder,
and that the stack is not higher than the paper limit mark (
2-47 for more details.
If the ALARM light is on, press the RESUME button to clear the error
message.
If you are printing from a Windows application, follow the instructions
displayed by the software on your PC.
). See page
Chapter 8
Advertisement
Table of Contents
