Table of Contents
Advertisement
Guidelines for Entering Information
The following section explains how to enter user information into the MultiPASS
C50.
Chapter 2
If you pause while entering information and do not make an entry for more
than 60 seconds, the MultiPASS C50 returns to standby mode and loses all
information you had entered up to that point. You will then have to start
again.
If the MultiPASS C50 rings while you are entering information, press the
(STOP) button and lift the optional handset or telephone: The MultiPASS
C50 will automatically save all the information you have entered up to the last
time you pressed the
If you hear nothing or a slow beep, someone is trying to send a fax: press
the
(START/COPY) button.
If you hear a voice, you are receiving a normal telephone call.
If your MultiPASS C50 is set to receive faxes automatically, you do not
have to press the
automatically receive the fax. See Chapter 5, "Receiving Faxes".
(START/COPY) button.
(STOP) button, the MultiPASS C50 will
Setting Up Your MultiPASS C50
2-55
Advertisement
Table of Contents
