Accessing the MultiPASS C50 Unit Settings
The following section describes how to access some of the settings listed on pages
2-68 to 2-70.
To Access the VOLUME CONTROL Settings (CALLING
VOLUME, KEYPAD VOLUME, ALARM VOLUME, LINE
MONITOR VOL)
1. Press FUNCTION.
FUNCTION
2. Use
1
2
3. Press START/COPY.
4. Use
1
2
5. Press START/COPY.
6. Use
1
2
7. Press START/COPY.
Chapter 2
FUNCTION
or
to select USER SETTINGS.
Ex:
USER SETTINGS
DATE & TIME
or
to select VOLUME CONTROL.
Ex:
VOLUME CONTROL
Ex:
CALLING VOLUME
or
to select the setting you want to set or change.
Ex:
KEYPAD VOLUME
Select CALLING VOLUME, KEYPAD VOLUME, ALARM VOLUME,
or LINE MONITOR VOL.
Ex:
VOL MID
The current setting is displayed.
Setting Up Your MultiPASS C50
2-71