Using Tone Dialling On A Pulse Line - Canon MultiPASS L60 User Manual

Using Tone Dialling On a Pulse Line

Even if you have a pulse line, the MultiPASS L60 enables you to use
tone dialling once you have connected to the number you are calling.
This lets you take advantage of many services that require tones, such
as selecting options from telephone "touch-line" services.
1. Pick up the handset and dial the number using the numeric
buttons.
2. Press FUNCTION, then press TONE/+ to switch to tone dialling.
3. When you have finished, hang up the handset.
N
When registering one-touch speed dialling and coded speed dialling
numbers, if you enter the TONE/+ button after the number, you will
switch to tone dialling after the phone connection is made.
Example: Operation
After the number (123456) is dialled, it will pause for 6 seconds (ppp*)
to allow the other party to answer and then it will switch to tone (T).
Now you can follow the instructions that were recorded by the party
you called.
*Users in the UK can only enter one pause between digits in telephone/fax
numbers.
8-6
Special Features
The unit connects using the pulses required by your phone line.
When the TONE/+ button is pressed, T is displayed in the
LCD.
Numbers entered after pressing the TONE/+ button will be
dialled using tone dialling.
Display
TEL=123456 T 3
PPP
Chapter 8