When To Replace The Bj Cartridge - Canon MultiPASSTM C50 User Manual

Canon printer/fax/scanner/copier user's guide multipasstm c50
Hide thumbs Also See for MultiPASSTM C50:
Table of Contents

Advertisement

When to Replace the BJ Cartridge

How frequently you need to replace your MultiPASS C50's BJ cartridge or one of
its ink tanks depends on how you use your MultiPASS C50. If you print a good
deal of graphics, halftones, or greyscales, you will need to replace the cartridge
more often than if you print mainly text. (See page A-9 for details on the life
expectancy of BJ cartridges.)
To help ensure the maximum life for your cartridges, always follow the guidelines
for cartridge maintenance given in "Guidelines for Using and Maintaining BJ
Cartridges" on page 2-27.
In general, you will need to replace the BJ cartridge in the following situations:
In addition:
If this message appears, do the following:
1. Press START/COPY to print any faxes in memory.
2. If there was no fax in memory, or if the fax's print was light, blank, or showed
9-10
Maintaining Your MultiPASS C50
If you have been using a BC-21/21e Colour BJ cartridge for over six months
or the BC-20 Black BJ cartridge for over a year.
If your printed output is not crisp and clear or has gaps in the characters
(missing dots), even after you have cleaned the print head five times as
described above.
If your colour printouts appear to be missing a colour, even after you have
cleaned the print head five times as described above.
If you are using the BC-21/21e Colour BJ cartridge and your output is blank,
one of the ink tanks is probably empty and needs to be replaced. Print the
NOZZLE CHECK test pattern to check whether the BJ cartridge needs
replacing or not. See page 9-8 for details.
If the message CHANGE CARTRIDGE appears in the LCD display, the BJ
cartridge may have run out of ink. This message also appears if the
MultiPASS C50 has to store a fax in its memory because the cartridge is out of
ink.
If the printout appears normal, you do not need to replace the BJ
cartridge. (Sometimes cleaning the print head or re-installing the cartridge
will clear up the problem.)
If the print is light or shows gaps, go to step 2.
gaps, print or copy a document to make sure the problem is not with the
machine that sent the fax.
Chapter 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipass c50

Table of Contents