Using Tone Dialing On A Pulse Line - Canon IMAGERUNNER 2010F Facsimile Manual

Using Tone Dialing on a Pulse Line

Many telephone information services for banks, airline reservations, hotel
reservations, etc., require tone dialing for accessing their services. If your machine
is connected to a rotary pulse line, follow the procedure below to set the machine to
tone dialing temporarily.
1
Hook
2
Tone
10
3
@. ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
7 8 9
OPER SYMBOLS
0
4
Start
5
Hook
10-2

Using Tone Dialing on a Pulse Line

Press [Hook] ➞ Specify the destination.
When the recorded message of the information service
answers, open all three one-touch speed dialing panels ➞
press [Tone].
To adjust the speaker volume, slide the speaker volume switch on the control
panel.
Use the numeric keys to enter the numbers requested by the
information service.
If you are requested to switch the machine to the receive
mode, press [Start].
Press [Hook].