Switching Temporarily to Tone Dialling
Many information services for banks, airline reservations, hotel reservations, etc.,
require tone dialling for their services. If your MultiPASS is connected to a rotary pulse
line, follow this procedure to set the unit temporarily for tone dialling:
1
Open the document tray.
2
Press Hook.
• Instead of pressing Hook, you can also lift the
handset if you have connected the optional
handset or a telephone to your unit.
3
Use the numeric buttons to dial the
telephone number of the information
service.
• The unit connects using the pulses required by
your telephone line.
4
When the recorded message of the
information service answers, press
Function.
5
Press Tone/+ to switch to tone dialling.
• When Tone/+ is pressed, T is displayed in the
LCD.
• If you pressed Hook in step 1, you can pick
up the handset if you need to talk to the other
party.
6
Use the numeric buttons to enter the
numbers requested by the information
service.
• Numbers entered after pressing Tone/+ will be
dialled using tone dialling.
7
When you have finished, press Hook to
disconnect the call.
• If you used the handset, hang up to
disconnect the call.
• Tone dialling is cancelled when you disconnect
the call.
9-4
Special Features
TEL=
Ex:
TEL=
7654321
Ex:
TEL=
7654321T
Ex:
TEL=7654321TA34
Chapter 9