Table of Contents
Advertisement
Sending Documents
This section describes how to send faxes with the MultiPASS C50.
Manual Sending via the Handset
If you have the optional handset or an extension phone connected to your
MultiPASS C50, you can send faxes manually. This allows you to talk to the other
party before sending the fax, which can be useful if the other party uses a single
line for both voice and fax transmissions.
Be sure to adjust the document feed lever before loading your document. See
page 6-5 for details.
1. Prepare the document and load it, face down, into the Automatic Document
2. Lift the handset, and dial the number.
4-8
Sending Faxes
Feeder (ADF).
Once the document is loaded, the LCD display shows the following:
MEMORY USED
STANDARD
DOCUMENT READY
If necessary, you can adjust the resolution and contrast. See page 4-3 for
details.
LINE IN USE
Ex:
TEL=15037537984
Use one of the dialling methods described on page 4-7.
0%
(Currently used image memory)
(Current resolution)
(Standby to scan)
Chapter 4
Advertisement
Table of Contents
