Table of Contents
Advertisement
The MultiPASS C50 Unit Settings
Details on the settings that can be adjusted from the MultiPASS C50 operation
panel are listed in the table below. For detailed instructions on accessing these
settings, refer to the page numbers indicated in the table.
The factory default settings in the table below are shown in bold type.
Setting
TEL REGISTRATION
1-TOUCH SPD DIAL
CODED SPEED DIAL
GROUP DIAL
USER SETTINGS
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
SCAN CONTRAST
VOLUME CONTROL
CALLING VOLUME
KEYPAD VOLUME
2-68
Setting Up Your MultiPASS C50
Description
See "One-Touch Speed Dialling".
See "Coded Speed Dialling".
See "Group Dialling"
Enter the date and time.
Enter your fax/telephone number.
Enter your name or company name.
Sets the scanning contrast of the faxes you
send.
Sets the volume of the ring produced when
the MultiPASS C50 detects a voice call
during fax/tel switchover.
Sets the volume of the keypad touch beep.
Settings
–
–
–
–
–
–
STANDARD
/DARKER/LIGHTER
VOL MID/VOL MAX/
VOL MIN
VOL MID/VOL MAX/
OFF/VOL MIN
Page
3-3
3-10
3-17
2-58
2-58
2-58
4-4
2-71
2-71
Chapter 2
Advertisement
Table of Contents
