Table of Contents
Advertisement
Redialling
Manual Redialling
If you are sending a fax manually (using the handset), you can redial by pressing
the
with the numeric buttons. (This also starts redialling regardless of whether
automatic redialling is enabled.)
To cancel manual redialling, simply press the
Automatic Redialling with Memory Sending
With memory sending, you can set the MultiPASS C50 to automatically dial the
fax number again if the receiving fax machine does not answer, if the line is busy,
or if an error occurs during sending. You can also control how many times the
MultiPASS C50 will redial the number, how long it will wait between dialling
attempts, and how much of the fax the MultiPASS C50 will resend if an error
occurs. For instructions, see the MultiPASS Desktop Manager User's Guide.
When automatic redialling is in use, the MultiPASS C50 alternately displays
AUTO REDIAL and the transaction number while it is waiting to redial:
When it begins redialling, the LCD display continuously shows the following:
During dialling:
Chapter 4
(REDIAL)/PAUSE button. This redials the last number that was dialled
AUTO REDIAL
TX/RX NO.
DIALING
503 555 1776
0002
(Fax number you dialled)
(STOP) button.
Sending Faxes
4-15
Advertisement
Table of Contents
