Loading Print Media For Manual Feed - Canon MultiPASSTM C50 User Manual

Canon printer/fax/scanner/copier user's guide multipasstm c50
Hide thumbs Also See for MultiPASSTM C50:
Table of Contents

Advertisement

Loading Print Media for Manual Feed

Follow the steps below to manually feed heavier-weight media (90-105 g/m
the MultiPASS C50.
You will need to select manual feed from the print dialog box of your Windows
application before printing. (See the MultiPASS Desktop Manager User's Guide
for instructions.) Load the sheet when the dialog box prompts you to do so. If
you attempt to load the sheet without selecting manual feed, the sheet will be
ejected.
1. Open the printer cover by grasping the document guides and lifting.
2. Hold the sheet with its print side facing upward, and align the sheet with the
3. Insert the sheet until it stops, and continue to hold the sheet until the
4. After the sheet is loaded, open the printer cover and make sure the sheet is
5. Close the printer cover.
Chapter 2
Make sure the paper thickness lever is set properly for the type of media
you are using. See "Adjusting the Paper Thickness Lever" on page 2-42.
left edge of the manual feeder (located at the back of the unit).
MultiPASS C50 "grabs" the sheet and pulls it in to the proper position.
set straight. If necessary, pull the sheet out and load it again.
Setting Up Your MultiPASS C50
2
) into
2-49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multipass c50

Table of Contents