Table of Contents
Advertisement
Glossy paper
Use the following procedure to load GP-101 glossy paper.
For best results, load only one sheet of glossy paper into the sheet feeder at a
time.
1. Open the printer cover by grasping the document guides and lifting.
2. Close the printer cover.
3. Pull the paper rest up until it stops.
4. Insert a sheet of glossy paper – with the glossy side facing up – into the sheet
2-48
Setting Up Your MultiPASS C50
Make sure the paper thickness lever is set to the centre. See "Adjusting
the Paper Thickness Lever" on page 2-42.
feeder until it stops, and align the paper guide with the edge of the sheet.
Chapter 2
Advertisement
Table of Contents
