Dialling Through A Switchboard; Registering The Access Type And The Outside Line Number Under The R Button - Canon MultiPASSTM C50 User Manual

Dialling Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your
MultiPASS C50 is connected through a PBX or other telephone switching system,
you have to dial the outside line access number first, and then dial the number of
the party you are calling.
You can register the type of access and the outside line access number under the
R button, so that you only have to press the FUNCTION and R buttons before
dialling the telephone or fax number you wish to reach. Follow the instructions
below for registering the R button.
Registering the Access Type and the Outside Line Number
under the R button
Follow these steps for registering the access type and the outside line number
under the R button:
1. Press FUNCTION.
FUNCTION
2. Press
1 2
3. Press START/COPY, then press
1 2
4. Press START/COPY, then press
1 2
4-20 Sending Faxes
FUNCTION
or to select USER SETTINGS.
USER SETTINGS
R-KEY SETTING
PBX
or to select R-KEY SETTING.
or to select PBX.
Chapter 4