Table of Contents
Advertisement
Problem
Output is faint
Printing takes too much time
The printout contains blurred
or smudged ink
Chapter 8
Possible cause
You may be using Draft print
quality or Fine mode.
You may be using Fine mode.
The medium you are using
may not be supported by the
MultiPASS C50.
You may be printing on the
wrong side of the paper.
Solution
Try using Standard mode. See the
MultiPASS Desktop Manager
User's Guide.
Try using Standard mode. See the
MultiPASS Desktop Manager
User's Guide.
Use only print media specified in
"Selecting the Print Media" on
page 2-37.
Many types of paper have a
"correct" side for printing. If
your paper does, make sure that
side is facing up. If the paper has
no obvious correct side, try
turning the paper over and
printing on the other side.
Troubleshooting
8-25
Advertisement
Table of Contents
