Switching To Tone Dialing Temporarily To Access On-Line Services - Canon MP 1000 User Manual

6.
< >
7.
8.
Switching to Tone Dialing Temporarily to Access
On-line Services
If your telephone system uses pulse dialing, you can still use on-
line services that require tone dialing to make selections. The
following procedure allows you to temporarily set the MultiPASS
1000 to send tone signals.
1.
2.
3.
When you hang up, the MultiPASS 1000 automatically switches
back to pulse dialing.
Chapter 9
Press the arrow buttons until the following display appears.
TEL LINE TYPE
ROTARY PULSE
Press .
START/COPY
TEL LINE TYPE
DATA ENTRY OK
Press .
STOP
Dial the telephone number of the on-line information service.
Press .
TONE
Use the numeric keypad to make your selections.
9-3
Using Special Dialing