Selecting And Installing A Bj Cartridge; Guidelines For Using And Maintaining Bj Cartridges - Canon MultiPASSTM C50 User Manual

Selecting and Installing a BJ Cartridge

Canon offers a number of Bubble Jet (BJ) cartridges to meet a wide range of
printing requirements. This section describes how to select the best BJ cartridge
for your needs, as well as how to install and maintain the cartridge.
The MultiPASS C50 comes with one BC-20 Black BJ cartridge and one BC-21 or
BC-21e Colour BJ cartridge.

Guidelines for Using and Maintaining BJ Cartridges

The most important thing you can do to ensure the best possible print quality, as
well as extend the life of your MultiPASS C50, is to take care of the MultiPASS
C50's BJ cartridges following these guidelines:
The ink in the BJ cartridges is difficult to clean up if spilled. To avoid spilling ink,
always be sure to follow these precautions when handling the cartridges:
Chapter 2
Store cartridges at room temperature.
Keep cartridges in their sealed containers until you are ready to use them.
Install the cartridge immediately after removing its print head cap and
protective tape.
Always use the cartridge within one year of unpacking it.
When changing cartridges, always store the unused cartridge in the SB-21 BJ
cartridge container that comes with the MultiPASS C50.
Do not remove the cartridge from the MultiPASS C50 unless necessary.
Do not attempt to disassemble or refill the cartridge.
Do not shake or drop the cartridge, or tip the print head downwards.
Keep BJ cartridges out of children's reach.
Setting Up Your MultiPASS C50 2-27