Diagnostic List; Event Logbook; Event History - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

Proline Prosonic Flow B 200 HART
Endress+Hauser
Navigation path
"Diagnostics" menu ® Device reset ® Device reset
Function scope of the "Device reset" parameter
Options Description
Cancel The user exists the parameter and no action is performed.
To factory defaults Every parameter is reset to its factory setting.
To delivery settings Every parameter for which a customized default setting was ordered is reset to that
customized value; all other parameters are reset to their factory setting.
Restart device Restarting the device resets every parameter whose data are saved in the volatile memory
(RAM) to the parameter's factory setting (e.g. measured value data). The device
configuration remains unchanged.
12.7

Diagnostic list

In the Diagnostic list submenu, up to 5 currently pending diagnostic messages can be displayed.
If more than 5 messages are pending, the messages with the highest priority are shown on the display.
Navigation path
"Diagnostics" menu ® Diagnostic list
Calling up and closing remedial measures
1. Press F.
à The message for the remedial measures for the selected diagnostic number opens.
2. Press S + O simultaneously.
à The message about the remedial measures closes.
For the structure of the remedial measure message (® ä 82)
12.8

Event logbook

12.8.1

Event history

A chronological overview of the event messages that have occurred is provided in the Events list
submenu.
Navigation path
"Diagnostics" menu ® Event logbook ® Events list
This option is not visible if no customized settings were ordered.
/ ../Diagnose list
Diagnostics
F273 Main electronic
Diagnostics 2
Diagnostics 3
Diagnostics and troubleshooting
A0014006-EN
87