Simulation - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

Proline Prosonic Flow B 200 HART
Endress+Hauser
HistoROM
A HistoROM is a "non-volatile" device memory in the form of an EEPROM.
While this action is in progress, the configuration cannot be edited via the local display and a
message on the processing status appears on the display.
Structure of the submenu
Conf. backup disp.
Parameter overview with brief description
Parameters
Operating time Indicates how long the
device has been in operation
up to this point.
Last backup Indicates when the last data
backup was saved to the
display module
Configuration management Select action for managing
the device data in the display
module
Comparison result Comparison between
present device data and
display backup
10.7

Simulation

The Simulation submenu enables you to simulate, without a real flow situation, various process
variables in the process and the device alarm mode and to verify downstream signal chains (switching
valves or closed-control loops).
Navigation path
"Diagnostics" menu ® Simulation
Structure of the submenu
Simulation
®
Operating time
Last backup
Configuration management
Comparison result
Description
Days (d), hours (h), minutes
(m), seconds (s)
Days (d), hours (h), minutes
(m), seconds (s)
• Cancel
• Execute backup
• Restore
• Duplicate
• Compare
• Clear backup data
• Set. identical
• Set. not ident.
• No backup
• Backup corrupt
• Check not done
• Dataset incomp.
®
Assign simulation process
variable
Value process variable
Commissioning
Selection/ Factory setting
Display
-
-
Cancel
Check not done
67