Configuration Management - Endress+Hauser HART Proline Prosonic Flow B 200 Operating Instructions Manual

Commissioning
66
Decimal places 2 A measured value is specified in
the parameter Value 2
display.
Decimal places 3 A measured value is specified in
the parameter Value 3
display.
Decimal places 4 A measured value is specified in
the parameter Value 4
display.
Display interval -
Header -
Header text The Free text option is selected
in the Header parameter.
Separator -
10.6

Configuration management

After commissioning, you can save the current device configuration, copy it to another measuring
point or restore the previous device configuration.
You can do so using the Configuration management parameter and the related options found in
the Conf. backup disp. submenu.
Navigation path
"Setup" menu ® Advanced setup ® Conf. backup disp.
Function scope of the "Configuration management" parameter
Options Description
Execute backup A backup copy of the current device configuration in the HistoROM is saved to the display
module of the device. The backup copy comprises the transmitter data of the device.
Restore The last backup copy of the device configuration is copied from the display module to the
HistoROM of the device. The backup copy comprises the transmitter data of the device.
Duplicate The transmitter configuration from another device is duplicated to the device using the
display module.
Compare The device configuration saved in the display module is compared to the current device
configuration of the HistoROM.
Clear backup data The backup copy of the device configuration is deleted from the display module of the device.
Proline Prosonic Flow B 200 HART
Select the number of • x
decimal places for • x.x
the display value. • x.xx
• x.xxx
• x.xxxx
Select the number of • x
decimal places for • x.x
the display value. • x.xx
• x.xxx
• x.xxxx
Select the number of • x
decimal places for • x.x
the display value. • x.xx
• x.xxx
• x.xxxx
Set time measured 1 to 10 s
values are shown on
display if display
alternates between
values.
Select header • Device tag
contents on local • Free text
display
Enter display header Max. 12 characters
text. such as letters,
numbers or special
characters
Select decimal • . (point)
separator for • , (comma)
displaying numerical
values.
x.xx
x.xx
x.xx
5 s
Device tag
- - - - - - - - - - - -
. (point)
Endress+Hauser